2022 Sauber Mfg. 1592 Construction & Maintenance Trailer 

2022 Sauber Mfg. 1592 Construction & Maintenance Trailer

Features may include:

Construction

3″ x 4″ Tubing frame and cross stringers w/ longitudinal reinforcement tongue area.

Fasteners

Bolts under ½”: Stainless steel; ½” and Above: Zinc-plated Grade 8; lock nuts used exclusively.

Front Jack (Model# 8810)

Model# 8810 EZ-Up side-winding Jack with heavy duty cast-bronze travel swivel. 8″ x 2″ Caster with mold-on polyurethane tread, mechanically bonded to an aluminum core. 28″ travel, 1650 lbs capacity.

Stabilizers

(2) adjustable almag telescoping outriggers with cast-bronze bolt-on housing.

Galvanized Pintle Eye and Hitch Extension

A galvanized 3” I.D., 60,000 lbs-capacity pintle eye is attached to our 11″ reversible hitch extension, which is adjustable to 6 different positions to properly match your towing vehicles. Our industry-leading hitch extension is made from hot-dipped galvanized cast-steel. Both the pintle eye and hitch extension are installed with grade-8 fasteners.

3/8” Safety Chain

Zinc-plated, grade-70 3/8” chain rated at 26,400 lbs breaking strength extends 23” beyond pintle eye. Zinc-plated, grade-70 clevis hook with safety latch rated at 26,400 lbs breaking strength. Assembly connected via 3”x3”x3/8” wall tubing continuously welded to trailer frame with inverted crucifix and 3/4”-10 grade-8 fastener with SAE high-strength washer and lock nut securing chain in crucifix.

LED Lighting & Electrical

LED sealed beam wiring system with stop / turn/ tail lights recessed in a structural tubing bumper to meet FMVSS 108 ensure long life of these signaling lights.  Automotive-grade wiring harness features SAE bullet-style connectors at each light, ensure easy replaceability of individual lights.  SAE 7-way socket protected top sides and back with almag housing.  Sealed breakaway with charging circuit and LED battery condition indicator with 450 C.C.A. maintenance-free battery.  Recessed ABS license plate housing with integrated lamp provide very high protection of both the license plate and its illumination.

Wheel Nut Indicators

Our wheel nuts are torqued to manufacturer specifications, and are then fitted with high-visibility wheel nut indicators. The indicators are fitted in a uniform pattern, so when a wheel nut has loosened, the indicator will become out of sequence. The wheel nut indicators are also heat sensitive. If there is a binding brake or seized bearing, the heat is transferred through the stud and nut. If this temperature exceeds 120º C (248º F), the indicator will start to blister around the circumference and eventually start to distort. Pre-flight walkaround checks now can include wheel nut checks.

Solar Power

We include our Model 8854 Solar System with a single solar panel with 4.3W of charging as standard equipment on all trailers we manufacture that utilize electric brakes or are equipped with an electric start Hydraulic Power Source. We have made this improvement to reduce customer maintenance costs, increase “up time” in field operations and provide the highest assurance to your users and community that the system will work as designed in the event the of a breakaway.

Registration

High-impact resistant Xenoy construction provides protection from UV and weather-related degradation. Includes gasket, water shield & poly bag.

Chocks

(2) Galvanized All Weather # 8500 w/ gripstrut design and bolt-on, cast chock-holders.

Galvanized Finish

Hot-dip galvanize entire trailer including galvanized wheel rims. Undercarriage and all non-galvanized attachments grit blasted, primed and painted before assembly on trailer and installed w/ serviceable fasteners only. 10-year galvanized finish warranty.

Warranty

Sauber Manufacturing leads the field with a 10-year, comprehensive, trailer and truck platform warranty. This warranty comes at no charge to our customers and we have the financial strength and integrity to back it up. Our warranty is an extension of who we are and demonstrates the quality of our builds.

• 10-Year Structural, parts & labor on all Sauber manufactured components
• 10-Year Galvanized finish warranty
• 3-Year Total parts & labor coverage
• All warranty support provided directly from Sauber Mfg. Co.
• Customer labor reimbursement @ $80/hour

Drawings

Solid model engineering drawings submitted with bid must include trailer detail and will be approved prior to production. Bids submitted without solid model drawings cannot be evaluated.

• Basic Body Sauber MA-300 fiberglass service body – single wheel application.
• Low Profile Mount 38″ high sidepacks.
• 1/4″ Aluminum floor w/ 3″ structural channel substructure – galvanized.
• Stainless steel fasteners used exclusively including self tapping screws.
• Self-locking nuts used exclusively.
• Chrome over aluminum bronze hinges guaranteed for life.
• Stainless steel Sauber slam latches w/ adjustable bronze strikers.
• All compartments keyed alike.
• Sponge rubber sealing – automotive type.
• High capacity aluminum extruded drip rail w/ patented drip edge.
• Gelcoat customer color.
• Rubber bumpers on all horizontal doors.
• Patented “No Sweat” compartment drains/vents all compartments.
• Modesty panel rear below floor line – 1/4″ aluminum treadplate.
• Front body guards 1/8″ AL treadplate.
• Truck Lite # 80350 dome lites in all compartments with lighted master switch.
• 7 1/2″ Gripstrut straight bumper w/ 4″ structural 4″ channel – fully reinforced – galvanized.
• Model 8467-7″ Safety Swing Step installed right side bumper w/ chrome grab handle.
• Cone Holder installed left side bumper – AL.
• Door chains all doors except L2.
• Certified installation of body and accessories.
• Five year warranty.

Superstructure

Fiberglass superstructure w/ double rear doors – 34 1/4″ high fastened to body w/ two part aluminum extrusion full length of superstructure. (3) Shelves installed each side superstructure; (2) Fiberglass and (1) compartment top shelf – rubber lined.

• Clearance lites centered in superstructure top front.
• GM Positive door checks installed both rear doors.
• Chrome over aluminum bronze hinges guaranteed for life.
• Slide rod latching mechanism both rear doors w/ locking L-handle right side.
• Truck Lite # 80350 Dome lite installed center superstructure w/ lighted switch.
• (2) 2-Rope hooks; (1) installed at rear on superstructure shelf – Galvanized.
• Plank holder installed left side load area – 8″ wide to hold (3) planks – Almag w/ nylon coating.
• Material rail w/ (4) hooks and 24″L chains installed left top of superstructure – Galvanized.
• Blower hose canister ring w/ footman loops and canvas strap installed right rear load area – AL.
• Unity RV25A Beacon installed rear center superstructure w/ lighted cab switch.
• (3) Truck Lite # 80378 flood lights w/ halogen bulbs installed rear top of superstructure – (1) center; (1) each end of body swivel mounted to illuminate street and curb side.
• Model 8320-R Easy Rider Ladderrack installed right side superstructure.
• Louisville # FE2220 20′ fiberglass extension ladder installed in rack w/ weatherproof paddle lock.

Compartments

• Transverse compartment open both sides – aluminum.
• Fiberglass thru shelf full length all left compartments.
• Almag rear thru shelf access door w/ inside stainless steel latch.
• R1 (1) Pull out drawer open both sides – floor mount – 80″Lx22″Wx4″H – AL
• R2 (1) Plain shelf
• (1) Small parts tray under shelf w/ adjustable dividers – 32″Lx10″Dx2″H w/ hasp lock
• (1) Bin bottom divider package
• R3 Open
• L1 (1) Pull out drawer as above (R1)
• L2 (1) Bin bottom divider package
• L3 (1) Divider shelf

Shelving Notes

All dividers 16 gauge nylon coated. Shelves have 2″ lip – oak divider retainers 1.5″ high. Divider slots 1.5″ apart w/ dividers installed every other slot. All shelving 12 ga. aluminum unless otherwise noted. All shelving and compartment bottoms are rubber lined.